• Θηλυκός συνδετήρας αναφοράς σύκων C.3 του ISO 80369-7 για τη δοκιμή του θηλυκού συνδετήρα Eparation κλειδαριών Luer από το αξονικό φορτίο
  • Θηλυκός συνδετήρας αναφοράς σύκων C.3 του ISO 80369-7 για τη δοκιμή του θηλυκού συνδετήρα Eparation κλειδαριών Luer από το αξονικό φορτίο
καλή τιμή Θηλυκός συνδετήρας αναφοράς σύκων C.3 του ISO 80369-7 για τη δοκιμή του θηλυκού συνδετήρα Eparation κλειδαριών Luer από το αξονικό φορτίο σε απευθείας σύνδεση

Θηλυκός συνδετήρας αναφοράς σύκων C.3 του ISO 80369-7 για τη δοκιμή του θηλυκού συνδετήρα Eparation κλειδαριών Luer από το αξονικό φορτίο

Λεπτομέρειες:

Τόπος καταγωγής: Κίνα
Μάρκα: Kingpo
Πιστοποίηση: Certificate of ISO17025
Αριθμό μοντέλου: Σύκο C.3 του ISO 80369-7

Πληρωμής & Αποστολής Όροι:

Ποσότητα παραγγελίας min: 1
Τιμή: To be quoted
Συσκευασία λεπτομέρειες: πακέτο χαρτοκιβωτίων ασφάλειας ή κιβώτιο κοντραπλακέ
Χρόνος παράδοσης: 7 εργάσιμες ημέρες
Όροι πληρωμής: T / T
Δυνατότητα προσφοράς: 10 PC το μήνα
Επικοινωνήστε

Λεπτομερής ενημέρωση

Μάρκα: Kingpo Υλικό: Χάλυβας σκληρότητας
Πρότυπο: ISO 80369-7 Σκληρότητα: HRC58-62
Εγγύηση: 1 έτος Όνομα Προϊόντος: ΜΕΤΡΗΤΉΣ LUER
Υψηλό φως:

IEC 60061 3

,

Πηγαίνετε και να μην πάει μετρητής

Περιγραφή προϊόντων

ISO 80369-7 Fig C.3 — Female reference connector for testing female luer lock connector for separation from axial load and resistance to overriding

ISO 80369-7 FIGURE C.1 and C.3 FEMALE LUER REFERENCE CONNECTOR

 

ISO 80369-7:2016 cancels and replaces the first edition ISO 594-1:1986 and the second edition of ISO 594-2:1998, clauses, subclauses, tables, figures, and annexes of which have been consolidated and technically revised. Because of this, ISO 594 connections must be tested per ISO 80369-7 requirements. Read: Discussion on the change.

 

Compatibility/Interchangeability...

 

Between ISO 594/2 Fig 5 and ISO 80369-7 Fig C.1

The ISO 594/2 Figure 5 Female Luer Reference Conical Fitting is replaced by ISO 80369-7 Fig C.1 Female Luer Reference Connector. The ISO 80369-7 Figure C.1 is identical to the ISO 594/2 Figure 5 Reference Fitting. ISO 80369-7 Fig C.1 and ISO 594/2 Fig 5 are completely interchangeable. If you request a quote for a new ISO 594/2 Fig 5 Reference Connector from us; we will quote an item which will pass both ISO 594 and ISO 80369-7 requirements. It will be DUO-marked and DUO-certified to both specifications.

 

Between ISO 594/2 Fig 6 and ISO 80369-7 Fig C.3

The ISO 594/2 Figure 6 Female Luer Reference Conical Fitting is replaced by ISO 80369-7 Fig C.3 Female Luer Reference Connector. The ISO 80369-7 Figure C.3 is identical to the ISO 594/2 Figure 6 Reference Fitting. ISO 80369-7 Fig C.3 and ISO 594/2 Fig 6 are completely interchangeable. If you request a quote for a new ISO 594/2 Fig 6 Reference Connector from us; we will quote an item which will pass both ISO 594 and ISO 80369-7 requirements. It will be DUO-marked and DUO-certified to both specifications.

 

General Construction Details:

Keeping with the requirements of ISO 80369-7; the Reference Connectors we sell are from hardened stainless steel. They have design details which are not specified in ISO 80369-7 and which allow connection to test equipment. These design details vary by manufacturer so be sure you understand the configuration before you order the Reference Connector. The ISO 80369 Reference Connectors are an integral part of Luer needle and syringe testing.

 

Θέλετε να μάθετε περισσότερες λεπτομέρειες σχετικά με αυτό το προϊόν
Ik ben geïnteresseerd Θηλυκός συνδετήρας αναφοράς σύκων C.3 του ISO 80369-7 για τη δοκιμή του θηλυκού συνδετήρα Eparation κλειδαριών Luer από το αξονικό φορτίο θα μπορούσατε να μου στείλετε περισσότερες λεπτομέρειες όπως τύπος, μέγεθος, ποσότητα, υλικό κ.λπ.
Ευχαριστώ!
Wachten op je antwoord.